Main characteristics Alfa-V VXD
Standard configuration
- Coil
Innovative coil design based on small diameter K65 copper tubes and corrugated aluminium fins provides excellent heat transfer. Circuiting design is fully optimized to the thermodynamic properties of CO2. Stainless steel header tubes for on-site welding connections optional. Standard fin spacing 2.1 mm, available with two Alu-fin types:
- Turbo fins for maximized capacity
- Industrial fins for long lasting performance
- Separate connections provide the opportunity for independent operation of both gas cooler coils.
- Frame construction provides high rigidity for protection against vibration and thermal expansion. Casing, supports and frame made of corrosion resistant galvanized steel (class C4-H). Separated fan sections and removable fan rings.
- ErP compliant fan AC & EC motors, available in three fan diameters (800, 910 & 1000 mm) and five noise levels. Motors with external rotor, protection class IP 54 according to DIN 40050.
AC power supplies 400/50/3, 400/60/3 and 460/60/3 with integrated thermo contacts to provide reliable protection against thermal overload. EC power supply 380-480/50-60/3.
Options
For a full overview of all available options and additional technical specifications please refer to the product leaflet.
How it works
Alfa LU-VE finned coil air heat exchangers have been designed to achieve an optimized exchange of thermal energy between air and a refrigerant or fluid. The ‘heart’ of our air heat exchangers is the finned coil, built up from a circuit of interconnected tube serpentines and fins to increase the heat exchanging surface. Thanks to the combination of key design variables (coil materials, coil geometry, casing design, fan type), air units are very versatile heat exchangers with a great variety of applications in many industries. Alfa LU-VE supplies finned coil air heat exchanger products for a wide variety of applications.
Air-cooled gas condensers
CO2 gas coolers replace traditional air-cooled condensers in refrigerating systems that have been designed for the use of CO2 as a single refrigerant. Such installations are getting more and more widely used. In air-cooled gas coolers the hot, compressed CO2 gas flows through the gas cooler coil and is cooled down by the ambient air that is forced through the coil. Due to the thermodynamic properties of CO2, there is no phase change in the gas cooler. In CO2 refrigerant systems the refrigerant gas is not liquefied until the next system component - the expansion valve (see illustration above). Air-cooled gas coolers operate with considerably higher pressures than air-cooled condensers.
